项目名称:垦利6-1油田5-1、5-2、6-1区块开发项目
招标编号:0704-2140JDCP1281/01
日 期:2021年8月9日
1.中化建国际招标有限责任公司(以下简称“招标机构”)受中海石油(中国)有限公司委托,垦利6-1油田5-1、5-2、6-1区块开发项目的下列全新货物和有关服务进行国际公开招标, 现邀请投标人对下列货物和服务提交密封投标:
货物名称:分析类仪表
主要技术要求:
根据项目需求,购买7台油中含水分析仪。主要技术参数见下表,详细技术参数请见数据表。
|
平台 |
设备名称 |
数量 |
备注 |
|
油中含水 分析仪 |
CEP |
CEP-AE/AIT-2033 |
1 |
12”ANSI 600#RF |
|
油中含水 分析仪 |
CEP |
CEP-AE/AIT-2031A |
1 |
8”ANSI 150#RF |
|
油中含水 分析仪 |
CEP |
CEP-AE/AIT-2031B |
1 |
8”ANSI 150#RF |
|
油中含水 分析仪 |
东营处理厂 |
AT-17111 |
1 |
DN400 CL150 |
|
油中含水 分析仪 |
东营处理厂 |
AT-17331 |
1 |
DN400 CL150 |
|
水中含油 分析仪 |
东营处理厂 |
AT-17251 |
1 |
|
|
水中含油 分析仪 |
东营处理厂 |
AT-17250 |
1 |
|
数量:7台
交货期:2022年5月10日(国内)或2022年4月25日(进口)
交货地点:CEP为青岛,其他平台为塘沽
国内:天津塘沽建造基地;
国外:中国天津港(进口货物)。
2.业绩和资格要求:
(1)★投标人所投标的油中含水(微波测量法)和水中含油分析仪(紫外荧光测量法)应为制造厂家的成熟产品,买方不接受新试制产品。在投标截止日前十年内(合同签订时间应在投标截止日前十年内),投标人所投产品应具有至少两个项目(每个项目不低于3台)在海洋石油平台或FPSO上运行五年及以上(从交货验收合格日期或使用方出具的运行时间证明文件起计)的业绩,并提供相应的书面材料证明(书面材料是指:合同及相应交货验收单或合同及相应使用方出具的有效证明文件);上述文件中如未包含油中含水和水中含油分析仪所在设施的名称及使用方信息,投标人应提供有效说明文件。未提交业绩证明文件,或所提供的业绩证明文件无法验证签署时间、货物名称、供货数量、使用环境、微波法测量原理技术、紫外荧光分析法测量原理技术,均视为无效业绩。
3.有兴趣的合格投标人可通过以下方式获取招标文件:
从2021年8月9日至2021年8月17日止,请登录中国海洋石油集团有限公司采办业务管理与交易系统(https://buy.cnooc.com.cn)的招标公告页面进行购买。首次登录必须先进行注册(免费),注册成功后,方可购买招标文件。购买过程必须全程在线操作,线下形式的汇款将不予接受。标书费支付成功后,投标人可自行下载招标文件。售后不退。如未在系统中领购招标文件,不可参加投标。本招标文件每套售价为2000元人民币或300美元,售后不退。
4.投标文件递交截止时间和地点:所有投标文件都应附有按规定提交的投标保证金并于2021年8月31日10:00时(北京时间)前递交至北京市东城区东直门海油大厦第六会议室。
5.开标时间:定于2021年8月31日10:00时(北京时间)开标。开标地点:天津市滨海新区海川路2121号海洋石油大厦A座。
6. 本次招标公告同时在机电产品招标投标电子交易平台(www.chinabidding.com)上发布。
7. 投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。
招标人:中海石油(中国)有限公司
详细地址:天津市滨海新区海川路2121号海洋石油大厦A座
邮 编:300459
联系人:张丽霞
联系电话:+86-22-66502346
招标代理机构:中化建国际招标有限责任公司
详细地址:北京市东城区东直门外小街6号海油大厦4层
邮编:100027
联系人:于娜
联系电话:+86-10-84523443
电子邮箱:yuna5@cncccitc.com.cn
Project: KL6-1 OIL FIELD BLOCK 5-1&5-2&6-1 DEVELOPMENT PROJECT
BidNo:0704-2140JDCP1281/01
Date:August 09., 2021
1. CNCCC International TenderingCo., Ltd.(hereinafter called “Tendering Agent”), for and on behalf of CNOOC China Limited(hereinafter called"Purchaser") invites sealedbids fromeligiblebidders for the supply offollowing equipment:
Name of Goods: The Analyzers
Main technical requirement:
According to project requirements, purchase one analyzers, The main technical parameters are shown in the table below, and the detailed technical parameters are in the data sheet.
|
Platform |
Tag No |
Quantity |
Remark |
|
The water in oil analyzers |
CEP |
CEP-AE/AIT-2033 |
1 |
12”ANSI 600#RF |
|
The water in oil analyzers |
CEP |
CEP-AE/AIT-2031A |
1 |
8”ANSI 150#RF |
|
The water in oil analyzers |
CEP |
CEP-AE/AIT-2031B |
1 |
8”ANSI 150#RF |
|
The water in oil analyzers |
Dongying |
AT-17111 |
1 |
DN400 CL150 |
|
The water in oil analyzers |
Dongying |
AT-17331 |
1 |
DN400 CL150 |
|
The oil in water analyzers |
Dongying |
AT-17251 |
1 |
|
|
The oil in water analyzers |
Dongying |
AT-17250 |
1 |
|
Qty: seven SETS
Delivery Schedule:
On or before May.10th,2022(From within PRC);
On or before April.25th,2022 (From outside PRC).
Destination of delivery:
To Construction Site of tanggu,tianjin(From within PRC);
Tianjin Seaport(From outside PRC)
2. Qualification requirement:
(1)★The analyzers provided(microwave measurement & UV fluorescence) by VENDOR shall be the mature products of the manufacturers, new trial products would not been accepted. Since in recent 10 years to the bid deadline(The contract signing time should be within ten years before the bid deadline), the products provided by VENDOR should have at least two projects(each project should have not less than 3 sets) had successful applications in offshore platform/FPSO for five years ( From the date of acceptance of delivery or the certificate issued by USER). The VENDOR shall provide the corresponding documents (written material refers to: contract and the commissioning acceptance documents or contract and the effective proof certificate issued by the operator). If the above documents do not contain the name of the facility where water in oil & oil in water analyzer is located and the information of the user, the bidder shall provide a valid document. Failure to submit a performance document or the performance document provided cannot verify the time of signing, the name of the goods, the quantity of supply, the environment of use, and the techniques of microwave measurement & UV fluorescence are considered invalid.
3. All those who are willing to participate in the bids are kindly requested to :enter intowebsite http://buy.cnooc.com.cn topurchasethebidding documents (electronic edition) on line from August 9, 2021 to August 17, 2020 upon non-refundable payment of RMB2000 or USD300 for each copy.
4.Bids must bedeliveredto meeting room 6, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China for submission ofbids before 10:00 a.m. (Beijing time) on August 31, 2021.
5. Bid opening time: the bid will beopened at 10:00 a.m. on August 31 2021(Beijing time). Bid opening place: meeting room 6, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China
6.The Invitation for Bids is issued on the website ofwww.chinabidding.comsimultaneously.
7.The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
Name of Purchaser: CNOOC CHINA LIMITED
Address: BuildingA, No.2121,Haichuan Road, Binhai New Area,Tianjin, P.R. China, 300459
Contact Person: Ms.Zhang Lixia
Telephone: +86-22-66502346
E-mail:zhanglx4@cnooc.com.cn
NameofTendering Agent: CNCCCInternational TenderingCo.,Ltd.
Address:4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China
Contactperson:Mrs.Yuna
Telephone:+86-10-84523443
E-mail:yuna5@cncccitc.com.cn
附件1: 机电产品-最低评标价法.pdf