项目名称：涠西南油田群伴生气利用开发建设工程项目离心式伴生气压缩机采购

招标编号：0704-2240JDCP0785/01

发标日期：2022年5月25日

 

1.中化建国际招标有限责任公司（以下简称：招标代理机构）受中海石油（中国）有限公司（以下简称：招标人）委托，现邀请投标人对下列货物和服务提交密封投标：

资金到位或资金来源落实情况：已落实

项目已具备招标条件的说明：已具备

项目概况：涠洲油田群位于南海北部湾海域，由多个油田连片生产。涠洲油田群生产天然气基本为伴生气，随着涠洲油田群开发，涠洲油田伴生气总产量逐年升高，但海上平台伴生气回收能力不足，大量的伴生气只能进入火炬系统燃烧放空，造成浪费。本项目拟在WZ12-1 PUQ平台更换伴生气压缩机，在WZ12-1 PUQB平台更换注气压缩机，利用涠西南油田群伴生气，依托涠洲12-1WHPC平台进行涠洲12-1油田南块的开发，新增8口调整井（3注5采），进行注气开发/气举生产。

货物名称：离心式伴生气压缩机

数量：1套

主要技术参数：

1）压缩机应为单轴垂直剖分离心式压缩机。

2）离心式伴生气压缩机组的处理能力、进出口压力满足买方要求；供应商需要提供机组详细的信息，比如性能曲线、设计工作点等，来说明和保证压缩机能处理表1.1中不同压力、流量工况的天然气，压缩机的处理量可通过变频和回流来满足。

 

3）受限于PUQ平台南面吊机最大吊装能力限制，投标人应对压缩机橇进行分块设计，每吊干重不得大于14吨，投标时应提供分吊方案和分吊重量。

4）受平台空间限制，根据每个分块和柜体就位后的尺寸不得大于下列表格里给出的参数：

序号	分块或者柜体名称	最大尺寸(LXWXH)mm	备注
1	入口分离器	2000*2000*5000	罐体最大直径1500mm
2	换热器	4800*1700*1900	罐体直径1000mm，抽芯空间限1700×2000mm
3	润滑油站	4100*1700*4200
4	主机橇（压缩机+电机+齿轮箱+底座）	2500*8000*2500
5	密封盘站	1000*2000*2200
6	变频器	预充电及变压器柜：3300（宽）×1800（深）×2800（高） 功率单元及控制柜 ：4200（宽）×1800（深）×2800（高）
7	UCP控制柜	800（宽）×800（深）×2100（高）×3面
8	UPS及低压设备控制柜	1200（宽）×800（深）×2200（高）×2面
9	电池柜	1000（宽）×500（深）×1600（高）

 

交货计划：

国内交货要求：合同签订后9个月内完税后交付至海南省澄迈县马村码头

国外交货要求：合同签订后9个月内DAP海南省澄迈县马村码头  

 

2.资格和业绩要求：

(1) 资格要求

a) 是否接受代理商投标：不接受。

b）是否接受联合体投标：不接受。

c) 如果投标人为境内注册公司，需提供有效的营业执照（具备独立法人资格）、一般纳税人证明/税务登记证、组织机构代码证复印件，并加盖公章（以上所有证明文件在年审有效期内）；如果投标人为境外注册公司，需提供有效的公司登记注册证明。

d) 投标人承诺压缩机橇系统取得第三方船级社（ABS、DNV、BV、CCS之一）的产品检验证书。

(2) 业绩要求：

 

a）投标人应是具有独立法人资格的离心压缩机头制造商，机组成撬原则上应由投标人完成。如果投标人委托第三方成撬，成橇方应自2015年1月1日（合同签订日期）至截标日日成撬方应至少有1台套海上平台或FPSO天然气离心压缩机（压缩机功率≥3MW）成撬业绩，投标时应提供成撬方业绩的证明文件。证明文件可以是合同复印件（必须包括）或调试验收报告或用户证明文件。证明文件应包括以下信息：用户名称、设备名称、合同签署日期、调试完成日期、数量、设备功率、介质、项目名称、使用环境。

b）离心压缩机头应是投标人的标准产品。离心压缩机自2015年1月1日（合同签订日期）至截标日至少有1套产品在海上平台或FPSO成功运行了一年及以上的业绩，投标时并提供相关业绩证明，证明文件可以是合同复印件（必须包括）或调试验收报告或用户证明文件。证明文件应包括以下信息：用户名称、设备名称、合同签署日期、调试完成日期、数量、介质、项目名称、使用环境。

c）投标人所投变频器应是变频器制造商的标准产品，至少有2台，6.3KV及以上电压等级，功率不小于2000KW变频器在海洋平台或FPSO应用于天然气压缩机成功运行2年以上应用业绩，投标时应提供相应的证明材料，证明文件可以是合同复印件（必须包括）或调试验收报告或用户证明文件。证明文件应包括以下信息：用户名称、设备名称、合同签署日期、调试完成日期、数量、设备功率、项目名称、电压等级、使用环境、使用设备。

3. 有兴趣的合格投标人可通过以下方式获取招标文件：

 

从 2022年5月25日至2022年6月1日止，在中国海油采办业务管理与交易系统（https://buy.cnooc.com.cn）购买招标文件（电子版）。投标人须在线填写购买招标文件登记表，并在线支付标书款至指定账户。在线支付成功后，投标人可自行下载招标文件。招标文件每套售价为2000元人民币或300美元（Name of A/C：CNCCC International Tendering Co., Ltd.Name of bank：INDUSTRIAL AND COMMERCIAL BANK OF CHINA, Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch,Account NO.：0200000709117000351,WIFT CODE: ICBKCNBJBJM Address of bank:  No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR:100006），售后不退。未购买招标文件不允许参加投标。

4. 投标文件递交截止时间和地点：所有投标文件都应附有按规定提交的投标保证金，并于2022年6月15日10:00时（北京时间）前递交至北京市东城区东直门外小街6号海油大厦四层第七会议室。

 

5. 开标时间：定于2022年6月15日10:00时（北京时间）开标。届时请参加投标的代表出席开标仪式。开标地点：北京市东城区东直门外小街6号海油大厦四层第七会议室。

 

6. 本次招标公告同时在机电产品招标投标电子交易平台（www.chinabidding.com）上发布。

 

7.投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。

 

招标人：中海石油（中国）有限公司

详细地址：广东省湛江市坡头区22号信箱

联 系 人：谢庆梅

电话：86-759-3911811

电子信箱：xieqm@cnooc.com.cn

招标代理机构：中化建国际招标有限责任公司

地址：北京市东城区东直门外小街6号海油大厦4层

邮编：100027

联系人：陈偲聪

联系电话：86-10-8452 5975

电子邮箱：chensc2@cnooc.com.cn

 

Invitation for Bids (IFB)

 

Project: Provision of Natural GAS COMPRESSOR for Weizhou Oilfields associated gas utilization development and construction project

Bid No.:0704-2240JDCP0785/01

Date: May 25, 2022

 

1.  CNCCC International Tendering Co., Ltd. (hereinafter called “Tendering Agent”), for and on behalf of CNOOC China Limited (hereinafter called "Purchaser") invites sealed bids from eligible bidders for the supply of following equipment:

Source of Funds: yes

Description of The Prepared Bidding Conditions: yes

 

Project overview:

Weizhou Oilfields is located in the Beibu Gulf of the South China Sea. It is produced by multiple oilfields. The natural gas produced by Weizhou Oilfield Group is basically associated gas. With the development of Weizhou Oilfield Group, the total output of associated gas in Weizhou oilfield increases year by year, but the associated gas recovery capacity of offshore platform is insufficient, and a large amount of associated gas can only be burned and vented in the flare system, resulting in waste. The project plans to replace the associated gas compressor on wz12-1 PUQ platform and the gas injection compressor on wz12-1 puqb platform, use the associated gas of Weixinan Oilfield Group and rely on Weizhou 12-1whpc platform to develop the south block of Weizhou 12-1 oilfield, and add 8 adjustment wells (3 injection and 5 production) for gas injection development / gas lift production.

 

Name of Goods:Natural GAS COMPRESSOR

 

Quantity: 1 set

 

Main Technical Data： 

1）The compressor shall be a single shaft vertical split core compressor.

2）The processing capacity and inlet and outlet pressure of the centrifugal associated gas compressor unit meet the requirements of the buyer; The supplier needs to provide detailed information of the unit, such as performance curve, design working point, etc., to explain and ensure that the compressor can handle natural gas under different pressure and flow conditions in Table 1.1, and the processing capacity of the compressor can be met by frequency conversion and reflux.

 

3）Limited by the maximum lifting capacity of the crane in the south of PUQ platform, the Seller shall design the compressor skid in blocks, and the dry weight of each lifting shall not be greater than 14 tons. The separate lifting scheme and weight shall be provided during bidding.

4）Llimited by the platform space, according to the size of each block and cabinet in place, it shall not be greater than the parameters given in the following table:

序号	分块或者柜体名称	最大尺寸(LXWXH)mm	备注
1	入口分离器	2000*2000*5000	罐体最大直径1500mm
2	换热器	4800*1700*1900	罐体直径1000mm，抽芯空间限1700×2000mm
3	润滑油站	4100*1700*4200
4	主机橇（压缩机+电机+齿轮箱+底座）	2500*8000*2500
5	密封盘站	1000*2000*2200
6	变频器	预充电及变压器柜：3300（宽）×1800（深）×2800（高） 功率单元及控制柜 ：4200（宽）×1800（深）×2800（高）
7	UCP控制柜	800（宽）×800（深）×2100（高）×3面
8	UPS及低压设备控制柜	1200（宽）×800（深）×2200（高）×2面
9	电池柜	1000（宽）×500（深）×1600（高）

 

Delivery Schedule:

From within PRC：The price of goods quoted delivered to No.142 Macun people road,old town economic development zone,Chengmai Country,Hainan Province, China within 9 months after signing contract.

From outside PRC: DAP No.142 Macun people road,old town economic development zone,Chengmai Country,Hainan Province, China within 9 months after signing contract.

 

2. Requirements for Qualification and reference of Bidder:

 (1) Requirements for Qualification of Bidder:

a) Joint Bids：NOT Acceptable.

b) Agent Bids: NOT Acceptable.

c) If the Bidder is domestic registered company, photocopies with Bidder’s official seal of valid business license(with independent legal person qualification), general taxpayer prove/tax registration certificate, organization code certificate shall be provided(all documents within the validity period);If the bidder is an overseas registered company, it shall provide valid company registration certificate. 

d) The Bidder should promise that the compressor skid system shall obtain the product inspection certificate from the third party Classification Society (one of ABS, DNV, BV, and CCS).

 (2)  Requirement for Bidder′s reference:

 

 a）The tenderer shall be the manufacturer of centrifugal compressor head with independent legal personality, and the unit skid shall be completed by the tenderer in principle. If the bidder entrusts a third party to skid, the skid shall have at least one set of offshore platform or FPSO natural gas centrifugal compressor (compressor power ≥ 3MW) skid performance from January 1, 2015 (contract signing date) to the bid closing date, and the supporting documents of skid performance shall be provided during bidding. The supporting documents can be copies of the contract (which must be included) or commissioning acceptance reports or user supporting documents. The supporting documents shall include the following information: user name, equipment name, contract signing date, commissioning completion date, quantity, equipment power, medium, project name and service environment.

b）The centrifugal compressor head shall be the standard product of the bidder. At least one set of centrifugal compressor has been successfully operated on the offshore platform or FPSO for more than one year from January 1, 2015 (contract signing date) to the bid closing date. Relevant performance certificates shall be provided when bidding. The supporting documents can be copies of the contract (must be included) or commissioning acceptance report or user supporting documents. The supporting documents shall include the following information: user name, equipment name, contract signing date, commissioning completion date, quantity, medium, project name and service environment.

c）The frequency converter offered by the bidder shall be the standard product of the frequency converter manufacturer, with at least two frequency converters with voltage grade of 6.3kV and above and power of no less than 2000kW. The frequency converter has been successfully used in natural gas compressor on offshore platform or FPSO for more than 2 years. Corresponding supporting materials shall be provided during bidding, which can be copies of the contract (must be included) or commissioning acceptance report or user supporting documents. The supporting documents shall include the following information: user name, equipment name, contract signing date, commissioning completion date, quantity, equipment power, project name, voltage level, use environment and use equipment.

 

 

3.  All those who are willing to participate in the bids are kindly requested to: enter into website https://buy.cnooc.com.cn/cbjyweb/ to purchase the bidding documents (electronic edition) on line from May 25, 2022 to June 1, 2022 upon non-refundable payment of RMB 2,000 or USD300 for each copy. (Name of A/C：CNCCC International Tendering Co., Ltd.Name of bank：INDUSTRIAL AND COMMERCIAL BANK OF CHINA, Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch,Account NO.：0200000709117000351,WIFT CODE: ICBKCNBJBJM Address of bank:  No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR:100006). After completion of the remittance, the bidder could download the bidding documents. Those who didn′t purchase the bidding documents are not allowed to participate in the bids.

 

4. Bids must be delivered to Meeting Room No.7, 4th Floor, CNOOC Tower,No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China for submission of bids before 10:00 a.m. (Beijing time) on June 15, 2022.

 

5. Bids will be opened in the presence of bidder′s representatives who choose to attend at 10:00 a.m. (Beijing time) on June 15, 2022 at Meeting Room No.7, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China for bid-opening.

 

6. The Invitation for Bids is issued on the website of www.chinabidding.com simultaneously.

 

7. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.

 

 

Name of Purchaser: CNOOC China Limited

Address:  P.O. No. 22, Potou, Zhanjiang, Guangdong, P.R. China 524057., P.R. China.

Contact Person: Xie Qingmei

Telephone: 86-759-3911811

E-mail: xieqm@cnooc.com.cn

 

Name of Tendering Agent: CNCCC International Tendering Co., Ltd.

Detailed Address: Floor 4, CNOOC Tower, No.6 DongzhimenwaiXiaojie, Dongcheng District, Beijing 100027, P.R. China

Post Code: 100027

Contact person: Chen sicong

Tel: +86-10-8452 5975

E-mail: chensc2@cnooc.com.cn