点击图片查看原图
玖城牌防水密封润滑脂
产品型号:SG3301 SG3302 SG3303
产品描述:玖城牌防水密封润滑脂采用氟硅油为基础油，聚四氟乙烯(PTFE)为稠化剂并加有抗氧化、抗腐蚀等精制而成。
产品特点:
优异的抗水性和密封性，耐冷、热水，抗环境老化。
优良的高、低温性能和抗氧化性能，稠度随温度变化小。
优良的耐油性、耐腐蚀性和耐大部化学品，使用寿命极长。
极佳的粘附性和润滑性，与绝大多数塑料和弹性体良好相容。
产品应用:
用于塑料、橡胶、金属之间及密封件的润滑与密封。
用于阀门、旋塞、柱塞、衬垫、O形圈和楔型密封器的防水、密封润滑及防腐蚀。
用于玩具、电器、仪表、卫浴器材、电子元件、电缆接头、绝缘端子的防水、密封、绝缘及防潮。
使用温度:-40℃～200℃
JC Waterproof Seal Grease
Product number:SG3301 SG3302 SG3303
product description:
JC Waterproof seal grease,the use of Fluorosilicone oil as base oil, polytetrafluoroethylene (PTFE) as thickening agent add the addition of antioxidants, anti-corrosion agents and other refined.
Performance characteristics:
Excellent resistance to water and sealing, cold , hot water, anti - environmental aging.
Excellent high and low temperature performance and oxidation resistance,Consistency is constant with the change of temperature.
Excellent oil resistance, corrosion resistance and resistance to most chemicals, very long service life;
Excellent adhesion and lubrication, compatible with most plastics and elastomers.
Recommended use:
It is used for lubrication and sealing between plastic, rubber, metal and seals.
Waterproof, sealed lubrication and anti-corrosion for valves, cocks, plunger, gaskets, o-rings and wedge seals;
It is used for waterproof, sealing, insulation and moisture proof of toys, electrical appliances, meters, bathroom fittings, electronic components, cable joints and insulation terminals.
Temperature range:-40℃ to 200℃
玖城牌防水密封润滑脂的典型数据：Typical data of JC Waterproof seal grease:
|
项目Project |
典型数据Typical data |
|
外观 Appearance |
白色光滑均匀油膏 |
|
工作锥入度/0.1mm 60次 Penetration 1/10mm 60 times |
235--285 |
|
滴点，℃ Drop point,℃ |
340 |
|
铜片腐蚀（T2.100℃.24h） Copper corrosion（T2.100℃.24h） |
合格PASS |
|
水淋流失量（79℃，1h）% Sprinkling loss（79℃，1h）% |
1.1 |
|
钢网分油（100℃，24h）% Steel mesh oil filtering（100℃，24h）% |
1.2 |
|
防腐蚀性（52℃，48h） Corrosion resistance（52℃，48h） |
合格 PASS |
|
极压性能（四球机法）Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
580 |
|
蒸发度（120℃，m/m）% Evaporativity（120℃，m/m）% |
≤1 |
|
EMCOR防锈实验，10%合成海水 EMCOR antirust experiment, 10% synthetic sea water |
0.0（无锈） (No rust) |
|
适用工作温度℃ Applicable working temperature ℃ |
-40--+200 |