分享好友 我要招标首页 频道列表

中海油宁波19-6气田群(一期)开发项目中控系统(PCS+ESD+FGS)和火气探测设备(重新招标)招标公告

中国石油招标投标网2021-07-23 10:22
 项目名称:宁波19-6气田群(一期)开发项目中控系统采购

招标编号:0704-2140JDCP0898

日 期:2021年7月22日

1.中化建国际招标有限责任公司(以下简称“招标机构”)受中海石油(中国)东海西湖石油天然气作业公司委托,邀请合格投标人就宁波19-6气田群(一期)开发项目的下列全新货物和有关服务进行国际公开招标,现邀请投标人对下列货物和服务提交密封投标:

资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:已具备
是否接受联合体投标:不接受

 

货物名称:中控系统

数量:1套

 

交货期:

中华人民共和国关境外提供的货物:中标通知书发出之日起5个月到达青岛港;

中华人民共和国关境内提供的货物:中标通知书发出之日起5个月到达山东省烟台市龙口市浅海经济开发区胜利油建海工基地。

 

主要技术要求:

一套中控系统包括三套独立的子系统PCS,ESD,F&G以及火气探测和报警设备。PCS系统应基于DCS技术。ESD系统应是故障安全系统,并应是冗余,容错,具备自诊断功能的系统。ESD和F&G系统必须满足SIL3要求。中控系统应采用通用I/O或电子布线技术。火焰探测器和可燃气体探测器应满足SIL 2要求,并由第三方(EXIDA,TUV,BV)认证。火焰探头应按照国家有关规定提供3C证书。中控系统需按照《海上固定平台安全规则》的要求进行设计、制造、认证和检验。

 

 

2.资格要求:

1)投标人必须是具有独立法人资格的PCS或ESD系统的制造商。国内投标人应提供有效的营业执照、组织机构代码证、税务登记证或在有效期内的三证合一营业执照,国外投标人应提供有效的独立法人证明。以证明投标人具有独立法人资格。

 

2)投标人所投标的中控系统(PCS,ESD,F&G)应为制造商的标准产品,制造商制造的中控系统需同时满足如下业绩要求:1、自2011年1月1日起至投标截止日(合同签订日期)内应至少具有两个在海上新建项目(海洋石油平台或FPSO)成功应用的业绩,且每个项目的输入输出总点数不少于2000;2、至少提供一个在新建无人平台成功应用的业绩;3、如果上述业绩1当中包括业绩2,则不必再提供业绩2。上述每项业绩应稳定运行不少于两年(“稳定运行”期限从调试验收报告签字日期或使用方出具的运行时间证明文件起计),并提供相关业绩证明。相应业绩证明文件要求详见下述业绩要求①和②。①销售合同复印件(含合同封面和签字页,以及相关的技术附件)和;②用户签字的成功运行证明文件或用户签发的临时接受证书或有第三方船级社签字的调试记录报告。投标人所提交的业绩证明文件必须至少体现以下内容:货物名称、供货数量、使用环境、技术参数/指标、成功运行时间。对于无人平台业绩,需提供图纸或文件证明平台未设置生活楼。如投标人提供调试报告,则以明确标明的成功运行开始时间或以调试报告签署时间为准。未提交业绩证明文件,或所提供的业绩证明文件无法验证以上内容的,均视为无效业绩。投标人须提供新的未使用过设备,新试制产品不予接受。

 

3)本次采办中控系统(含附属设备)应适用于海上平台应用,投标人应承诺进行第三方检验,并从COOOSO授权的认证机构之一(CCS、ABS、DNV、BV和Lloyd’s)获得机组整体的最终检验证书。

 

4)制造商应提供ISO9001质量管理体系认证证书或同等认证证书,且证书在有效期内。

 

3.有兴趣的合格投标人可通过以下方式获取招标文件:从2021年7月22日开始至2021年7月29日止,请登录中国海洋石油集团有限公司采办业务管理与交易系统(https://buy.cnooc.com.cn)的招标公告页面进行购买。首次登录必须先进行注册(免费),注册成功后,方可购买招标文件。购买过程必须全程在线操作,线下形式的汇款将不予接受。标书费支付成功后,投标人可自行下载招标文件。本招标文件每套售价为2000元人民币或300美元,售后不退。如未在系统中领购招标文件,不可参加投标。另外,本次招标公告同时在机电产品招标投标电子交易平台(www.chinabidding.com)上发布,投标人还需要在机电产品招标投标电子交易平台(http://www.chinabidding.com/)注册成功并通过平台审核。

 

4.投标文件递交截止时间和地点:所有投标文件都应附有按规定提交的投标保证金并于2021年8月12日10:00时(北京时间)前递交至北京市东城区东直门外小街6号海油大厦4层第八会议室,在此时间后收到的投标文件恕不接受。

 

5.开标时间:定于2021年8月12日10:00时(北京时间)开标。届时请参加投标的代表出席开标仪式。届时请参加投标的代表出席开标仪式。开标地点:北京市东城区东直门外小街6号海油大厦4层第八会议室。

6.本次招标公告同时在机电产品招标投标电子交易平台(www.chinabidding.com)上发布。

7.投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。

 

招标人:中海石油(中国)东海西湖石油天然气作业公司

详细地址:上海市长宁区通协路388号海洋石油大厦

邮编:200335

联系 人:刘玥

联系电话:+86-21-2283 0298

电子信箱:liuyue4@cnooc.com.cn

 

招标代理机构:中化建国际招标有限责任公司

详细地址:北京市东城区东直门外小街6号海油大厦4层

邮编:100027

联系人:陈偲聪

联系电话:86-10-84525975

电子邮箱:chensc2@cnooc.com.cn

 

Invitation for Bids (IFB)

 

Project: NINGBO 19-6 OIL & GAS FIELDS (phase I) DEVEOPMENT PROJECT CENTRAL ConTROL SYSTEM

Bid No: 0704-2140JDCP0898

Date:July 22, 2021

 

1.CNCCC International Tendering Co., Ltd.(hereinafter called “Tendering Agent”), for and on behalf of The East China Sea Xihu Oil&Gas Operating Company (hereinafter called"Purchaser") invites sealed bids from eligible bidders for the supply of following equipment for Ningbo 19-6 OIL& GAS FIELDS (phase I):

 

Source of Funds: yes
Description of The Prepared Bidding Conditions: yes
Joint Bids: Not Accepted

 

Name of Goods: NINGBO 19-6 OIL & GAS FIELDS (phase I) CENTRAL ConTROL SYSTEM

Qty: 1 SETS.

Delivery Schedule: For goods offered from outside PRC customs territory: arrived at Qingdao Port, Shandong, P.R.China within 5 months from the date of the issuance of the Notification of Award ; For goods offered from within PRC customs territory: arrived at Ocean Engineering base of SINOPEC SHENGLI OILFIELD, Qianhai Economic Development Zone, Longkou, Shandong Province, P.R. China within 5 months from the issuance of the Notification of Award.

 

Main technical requirement:

One set of central control system includes three independent subsystems PCS, ESD, F & G and fire and gas detection and alarm field equipment.PCS shall be DCS based. The ESD System shall be a failsafe system, fault tolerant, self-testing diagnostic system.The ESD and F&G system must meet the SIL 3.Universal I/O or electrical marshalling shall be used.The flame detectors and combustible gas detectors shall meet SIL 2 requirement and be certified by the third party (EXIDA,TUV,BV). Flame detector must have certificate for China compulsory product certification.The VENDOR shall conform that CENTROL ConTROL SYSTEM will be designed, manufactured, certified and inspected in accordance with Safety Rules for Offshore Fixed Platforms.

 

 

 

2. Bidder Qualification requirements: 

1) Bidder must be a manufacturer of PCS or ESD system with independent legal personality.Domestic bidder shall provide valid business license, Organization Code Certificate and tax registration certificate,or a Business License of Three Certificates in On within the validity period.

Foreign bidder shall provide valid independent legal entity certificate.

2) The Central Control System(PCS,ESD,F&G) shall be the standard product of the manufacturer. the Central Control System provided by the bidder should meet the following requirements at the same time: 1.Since January 1, 2011(date of contract) to the date of bid opening , the Central Control System should be successfully operated on at least two new-built offshore projects(platform/FPSO), and the total I/O Quantity of each project is no less than 2000; 2. At least one successful performance on newly-built unmanned platform; 3. If the performance 1 contains the Performance 2, it is not necessary to provide Performance 2. Each project shall run steadily for no less than two years(starts from the date of signature of commissioning acceptance report or the running time certificate issued by the user to the date of bid opening)The references shall be testified by proof materials. The Bidder shall submit the Reference List in given form, and provide corresponding documentary evidence per following evidence requirements ①&②:①Copies of sales contract (Including the cover and signature page, and the relevant technical attachments) and② 2A certificate notice signed by End user to Verify its successful run and/or temporary accept certificate signed by End user and/or  commissioning report signed by a third party classification society. The corresponding documentary evidence submitted by the Bidder shall at least demonstrate the content show as follows: Name of Goods, Quantity, usage circumstance, technical parameter /requirements ,drawings of the configuration type and the successful operation time. For the performance of unmanned platform, it is necessary to provide drawing or document to reflect that the platform is not equipped with a living modules. If the bidder provides the commissioning report, the start time of the successful operation shall be subject to the stated date or the signing date of the commissioning report. The performance without certification documents will be treated as invalid performance. Bidder shall provide the new equipment, unused prototype and trial-manufacture is unacceptable.

 

3) The CENTRAL ConTROL SYSTEM(including its accessory equipment) shall be suitable for offshore platform application, and the Manufacturer shall promise to arrange inspection and obtain final certificate of the package from one of the certifying agencies authorized by COOOSO, which are ABS, DNV, BV, Lloyd’s and CCS at its own cost.

 

4) The Manufacture should have the ISO9001 quality management system certification or equivalent certificate ,and the certificate is valid.

 

3. All those who are willing to participate in the bids are kindly requested to :enter into website http://buy.cnooc.com.cn to purchase the bidding documents (electronic edition) on line from July 22, 2021 to July 29, 2021 upon non-refundable payment of RMB2000 or USD300 for each copy. First login must be registered(free of charge), after successful registration, you can buy the bidding documents. The purchase process must be fully online, and offline remittance will not be accepted. After successful payment of the bid fee, the bidder can download the bidding documents by himself. The bid fee will not be refunded after successful payment. If you do not purchase the bidding documents in the system, you may not participate in the bidding. In addition, The tender notice is also issued on the Electronic transaction platform for mechanical and electrical products tendering and bidding (http://www.chinabidding.com), the bidder need to succeed in the Electronic transaction platform (http://www.chinabidding.com/) registered and through the platform review.


4. Bids must be delivered to No.8 Meeting Room,4th Floor,CNOOC Tower, No.6 Dongzhimenwai Xiao jie , Dong cheng District, Beijing 100027, P.R.China for submission of bids before 10:00a.m.(Beijing time) on August 12, 2021.

 

5. Bids will be opened in the presence of bidders_EpSingleQuotes_ representatives who choose to attend at 10:00 a.m. (Beijing time) on August 12, 2021 at No.8 Meeting Room,4th Floor,CNOOC Tower, No.6 Dongzhimenwai Xiao jie , Dong cheng District, Beijing 100027, P.R.China forbid-opening.

 

6.  The Invitation for Bids is issued on the website of www.chinabidding.com simultaneously.

 

7. The bidder needs to register before the tender on www.chinabidding.com.  And the evaluation results will be released on www.chinabidding.com.
 

Name of Purchaser: The East China Sea Xihu Oil&Gas Operating Company

Address: CNOOC Tower, 388 Tongxie Road, Changning Dsitrict, Shanghai, 200335, P.R.China.

Contact Person: Mrs. Liu Yue

Telephone: +86-21-22830298

E-mail: liuyue4@cnooc.com.cn

 

Name of TenderingAgent: CNCCC International Tendering Co.,Ltd.

Address: 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing, 100027, P.R.China

Contactperson: Mr. Chen Sicong

Telephone:+86-10-84525975

E-mail: chensc2@cnooc.com.cn

 


附件1: 
评标办法-最低价.pdf
反对 0
举报 0
收藏 0
打赏 0